BCD
Showing 31–45 of 47 results
-
Components and Parts, Sidemount BCD
OEM Hose Breakaway Connector
The MIB break away connector allows the ease of mounting a single ended bolt snap to your long hose configuration. Traditionally, divers have relied on using cave lines for this but with this, each time you practise your break away, you no longer have to retie your single bolt snap.
The MIB break away connector is easy to use, does not slide on the hose. This breakaway clips are designed for emergency use in the event of an ‘out of air’ scenario. As such they are not designed to hold up to repeated attaching and detaching from the hose. Additionally, the single breakaway clip is designed to fit most single-ended bolt snap ring with a max diameter of 4.5mil.
Trying to attach the clip to a ring with a diameter of more than 4.5mm is not advisable, and will likely cause the clip to break. And finally, repeated attaching and detaching of the single clips when used for something other than a secondary regulator hose runs the risk of reducing the clip’s lifespan.
SKU: n/a -
Components and Parts
Oxycheq Shoulder Harness Pads
Removable Shoulder Harness Pads go on the shoulder straps of a Hogarthian or Speed Harness Rig. Helps to keep the straps from digging into the shoulders when you are out of the water and the weight of your gear is on your shoulders. The pads are easily installed or removed without having to disassemble the Hogarthian or Speed Harness harness. The pads have a left and right side configuration.
SKU: n/a -
-
Backplate Systems
Scubapro S-Tek Complete Aluminium Backplate System
SCUBAPRO’s S-TEK Pure Back Plate / Wing System was designed for technical divers who subscribe to the DIR (Doing It Right) approach to streamlined and minimalistic equipment configurations. For convenience, the system is sold as a comprehensive kit including the Pure Harness with Back Plate, 30lb Donut Wing and Single Tank Adapter.
SKU: n/a -
-
Components and Parts
Sidemount Sliding D-Ring
Sliding D-ring’s are installed on the harness in addition to primary d-rings. Sliding D-ring can be pushed up and down the waist strap to desired by diver location and allows to adjust on-the-fly sidemount cylinder clip off point to compensate the change in tank buoyancy. Its a simple yet durable part that will let sidemount diver keep the cylinders in perfect position throughout entire dive ensuring most streamline and comfort trim profile. The stainless steel sliding d-rings will work with any 2″ wide nylon harness webbing.
SOLD AS PAIR / 2 pcs set
SKU: ODKUS11 -
BCD Pockets
xDeep Expandable Cargo Sidemount Pocket
Side mount dedicated pocket for accessories. A MUST HAVE FOR ALL SIDEMOUNT DIVERS. It’s made from high-quality, durable material. Equiped with not one, but two steel D-ring as a additional mount points, and two partitions enclosed with a zipper. Two double-ended carabiners and bungee strap included providing convenient attachment to your harness. By sliding the zipper it is possible to further extend the space provided by the cargo bag if you ever need to pack up something bigger.
SKU: n/a -
BCD Pockets
Xdeep Sidemount Trim Pockets L
XDEEP trim pockets can be mounted both to the shoulder straps and to the waist strap. Trimming in sidemount never was so easy.
To make them more comfortable, we put inside the pocket a special reinforcement plate made of highly durable polymer. It makes the weight fit tightly to the strap. Therefore, nothing is loose and nothing bumps.
The XDEEP trim pockets can be used with any sidemount or harness made of 50 mm (2 inch) webbing.
SKU: 59356 -
BCD Pockets
Xdeep Sidemount Trim Pockets M
XDEEP trim pockets can be mounted both to the shoulder straps and to the waist strap. Trimming in sidemount never was so easy.
To make them more comfortable, we put inside the pocket a special reinforcement plate made of highly durable polymer. It makes the weight fit tightly to the strap. Therefore, nothing is loose and nothing bumps.
The XDEEP trim pockets can be used with any sidemount or harness made of 50 mm (2 inch) webbing.
SKU: 59355 -
-
Components and Parts
45-Degree K Oral Power Inflator
A replacement K-style 45-Degree Oral and Power Inflator incorporating the common Schrader valve BC quick disconnect post.
- A replacement K-style 45-degree Power Inflator
- Fits 1-inch inside diameter corrugated rubber hose
- Includes mouth guard and pin for pull-to-dump cable
- Compatible with many/most Scuba brands
- The attaching hardware (clamps or zip ties) is not included
SKU: 5487FB8/41
