BCD
Showing 16–30 of 34 results
-
Components and Parts, Sidemount BCD
MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring
The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring was designed for backmount and sidemount divers. The 45º Fixed angle enable divers to easily clip off their single or doubled ended bolt snaps to it. Made from 2mm titanium so ultra-light and tough. The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring has a custom Split D-Ring titanium fitting for chest or waist. Simplifies the placement and separation of bolt snaps holding other equipment.
Item weight is only 15 grams, compared to stainless steel ones which are weighing 28 grams to 37 grams (Tri-glide with Angle D-Rings).
The price listed is per piece.
SKU: n/a -
Components and Parts, Sidemount BCD
MIB Titanium Oversize Triglide
The MIB Titanium Oversize Triglide was designed for divers who need to double loop their 2 inch webbing to secure items like cave buckles and rear lower backplate for their sidemount. Traditional stainless steel triglide has 2 inch slots with only 5mm allowance, making double looping difficult. The MIB Titanium Oversize Triglide has a 2 inch slot measuring 7mm, making double looping of most webbing easier.
Made from 2mm titanium so ultra light and tough. Oversized tri-glide Can be used to make easy adjustments to the harness or keep everything in place.
The price listed is per piece.
SKU: n/a -
-
Components and Parts
Oxycheq Shoulder Harness Pads
Removable Shoulder Harness Pads go on the shoulder straps of a Hogarthian or Speed Harness Rig. Helps to keep the straps from digging into the shoulders when you are out of the water and the weight of your gear is on your shoulders. The pads are easily installed or removed without having to disassemble the Hogarthian or Speed Harness harness. The pads have a left and right side configuration.
SKU: n/a -
-
Backplate Systems
Scubapro S-Tek Complete Aluminium Backplate System
SCUBAPRO’s S-TEK Pure Back Plate / Wing System was designed for technical divers who subscribe to the DIR (Doing It Right) approach to streamlined and minimalistic equipment configurations. For convenience, the system is sold as a comprehensive kit including the Pure Harness with Back Plate, 30lb Donut Wing and Single Tank Adapter.
SKU: n/a -
-
Components and Parts
Sidemount Sliding D-Ring
Sliding D-ring’s are installed on the harness in addition to primary d-rings. Sliding D-ring can be pushed up and down the waist strap to desired by diver location and allows to adjust on-the-fly sidemount cylinder clip off point to compensate the change in tank buoyancy. Its a simple yet durable part that will let sidemount diver keep the cylinders in perfect position throughout entire dive ensuring most streamline and comfort trim profile. The stainless steel sliding d-rings will work with any 2″ wide nylon harness webbing.
SOLD AS PAIR / 2 pcs set
SKU: ODKUS11 -
BCD Pockets
xDeep Expandable Cargo Sidemount Pocket
Side mount dedicated pocket for accessories. A MUST HAVE FOR ALL SIDEMOUNT DIVERS. It’s made from high-quality, durable material. Equiped with not one, but two steel D-ring as a additional mount points, and two partitions enclosed with a zipper. Two double-ended carabiners and bungee strap included providing convenient attachment to your harness. By sliding the zipper it is possible to further extend the space provided by the cargo bag if you ever need to pack up something bigger.
SKU: n/a -
BCD Pockets
Xdeep Sidemount Trim Pockets L
XDEEP trim pockets can be mounted both to the shoulder straps and to the waist strap. Trimming in sidemount never was so easy.
To make them more comfortable, we put inside the pocket a special reinforcement plate made of highly durable polymer. It makes the weight fit tightly to the strap. Therefore, nothing is loose and nothing bumps.
The XDEEP trim pockets can be used with any sidemount or harness made of 50 mm (2 inch) webbing.
SKU: 59356 -
BCD Pockets
Xdeep Sidemount Trim Pockets M
XDEEP trim pockets can be mounted both to the shoulder straps and to the waist strap. Trimming in sidemount never was so easy.
To make them more comfortable, we put inside the pocket a special reinforcement plate made of highly durable polymer. It makes the weight fit tightly to the strap. Therefore, nothing is loose and nothing bumps.
The XDEEP trim pockets can be used with any sidemount or harness made of 50 mm (2 inch) webbing.
SKU: 59355 -