Components and Parts
Showing all 12 results
-
Components and Parts
45-degree Oral Power Inflator – Mouthpiece only
A replacement rubber mouthpiece for the standard K-style 45-degree Oral and Power Inflator.
- A replacement mouthpiece for K-style 45-degree Power Inflator
- Soft rubber material designed for comfort
- Curved design allows for easier seal during use
- Keep a spare in your Save-A-Dive kit
SKU: n/a -
Components and Parts
BC Overpressure Relief and Dump Valve OPV
A replacement BC Overpressure Relief and Dump Valve w/o flanges.
- Replacement BC Overpressure Relief and Dump Valve
- Includes spring, cage, rubber stop and pull string as shown
- Use with Dive Rite, XDEEP, DSS, DGX, Halcyon, Oxycheq and other technical brands
A generic BC Overpressure Relief and Dump Valve w/o flanges that is compatible with Dive Rite, DGX, HOG (pre-2015), XDEEP, Deep Sea Supply, Oxycheq, Halcyon and a variety of other technical diving brand BCDs.
It is NOT compatible with Aqualung, ScubaPro, Seaquest, Mares, Mares, Hollis, OMS, Poseidon, Zeagle or other major brand products.
SKU: n/a -
Components and Parts
BCD Corrugated Hoses
- Traditional “oval” shape preferred by experienced and technical divers
- Use with both the “Elbow” and the “RE- Rapid Exhaust” assembly systems
- Compatible with most 1-inch diameter power inflators and BC Integrated second stages
- We suggest using the corrugated hose clamp kits to complete your assembly
SKU: n/a -
Components and Parts
BCD Shoulder Elbow
The plain BC elbow, preferred by experienced divers, can be used to replace a pull-to-dump elbow. The OEM (Non-Exhaust) Elbow w/Nut
This assembly is compatible with Wing Systems from Dive Rite, DGX, Oxycheq, Light Monkey, HOG, and some other technical wings with an opening of {1.75 in | 4.4 cm}. Not compatible with SeaQuest, Scubapro, Oceanic, Aqualung, Mares, Hollis, Zeagle, OMS and other major brands.
SKU: n/a -
Components and Parts
Bladder Flange Gasket
This generic Flange Gasket is a Female (outside/thicker/smaller) fitting that is positioned between the elbow and the flange. This is the gasket that creates the watertight seal between the corrugated hose assembly and the bladder for the aircell (wing).
SKU: n/a -
Components and Parts, Cylinder Accessories, Sidemount BCD
EPDM Hose Retainer
The EPDM Hose Retainer will withstand the test of time and diving environments with their resistance to temperature, salt, chlorine, and anything else your diving environment has to offer.
- Keep stage and deco hoses under control
- 1.5-inch wide EPDM material maintains elasticity thru extreme heat and cold
- Resistance to temperature, salt, sun and chlorine
- Fits cylinders 6.9-inch thru 8-inch diameter (11L)
SKU: n/a -
Components and Parts, Sidemount BCD
MIB Hose Breakaway Connector
The MIB break away connector allows the ease of mounting a single ended bolt snap to your long hose configuration. Traditionally, divers have relied on using cave lines for this but with this, each time you practise your break away, you no longer have to retie your single bolt snap.
The MIB break away connector is easy to use, does not slide on the hose. This breakaway clips are designed for emergency use in the event of an ‘out of air’ scenario. As such they are not designed to hold up to repeated attaching and detaching from the hose. Additionally, the single breakaway clip is designed to fit most single-ended bolt snap ring with a max diameter of 4.5mil.
Trying to attach the clip to a ring with a diameter of more than 4.5mm is not advisable, and will likely cause the clip to break. And finally, repeated attaching and detaching of the single clips when used for something other than a secondary regulator hose runs the risk of reducing the clip’s lifespan.
SKU: n/a -
Components and Parts, Sidemount BCD
MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring
The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring was designed for backmount and sidemount divers. The 45º Fixed angle enable divers to easily clip off their single or doubled ended bolt snaps to it. Made from 2mm titanium so ultra-light and tough. The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring has a custom Split D-Ring titanium fitting for chest or waist. Simplifies the placement and separation of bolt snaps holding other equipment.
Item weight is only 15 grams, compared to stainless steel ones which are weighing 28 grams to 37 grams (Tri-glide with Angle D-Rings).
The price listed is per piece.
SKU: n/a -
-
Components and Parts
Sidemount Sliding D-Ring
Sliding D-ring’s are installed on the harness in addition to primary d-rings. Sliding D-ring can be pushed up and down the waist strap to desired by diver location and allows to adjust on-the-fly sidemount cylinder clip off point to compensate the change in tank buoyancy. Its a simple yet durable part that will let sidemount diver keep the cylinders in perfect position throughout entire dive ensuring most streamline and comfort trim profile. The stainless steel sliding d-rings will work with any 2″ wide nylon harness webbing.
SOLD AS PAIR / 2 pcs set
SKU: ODKUS11 -
Components and Parts
45-Degree K Oral Power Inflator
A replacement K-style 45-Degree Oral and Power Inflator incorporating the common Schrader valve BC quick disconnect post.
- A replacement K-style 45-degree Power Inflator
- Fits 1-inch inside diameter corrugated rubber hose
- Includes mouth guard and pin for pull-to-dump cable
- Compatible with many/most Scuba brands
- The attaching hardware (clamps or zip ties) is not included
SKU: 5487FB8/41