Shop
Showing 91–105 of 349 results
-
Accessories
Mares ABS Plus Fin Buckle with Strap
Mares has designed the ABS Plus buckle in order to improve the release system by increasing the fastening safety. If pressure is applied from only one side, the buckle will not release, or will release only with great difficulty.
Both buttons must be pressed at the same time to open the buckle. This new system also makes it easier to use, by reducing the effort required for both opening and closing of the buckle.
This product is just for 1 unit, and does not come in a pair.
SKU: n/a -
Open Heel Fins
Mares Avanti Quattro + Plus
The Mares Avanti Quattro + diving fins exceed the established performance of the traditional model thanks to the use of new materials that optimize efficiency. Increased responsiveness and thrust power with an even more attractive look and a standard Bungee Strap. The proven Channel Thrust technology makes the fin versatile and perfect in all diving conditions. The stabilizing drifts improve stability, eliminating ankle torsion. The anatomical foot pocket transmits more power to the blade.
SKU: n/a -
Components and Parts, Sidemount BCD
MIB Hose Breakaway Connector
The MIB break away connector allows the ease of mounting a single ended bolt snap to your long hose configuration. Traditionally, divers have relied on using cave lines for this but with this, each time you practise your break away, you no longer have to retie your single bolt snap.
The MIB break away connector is easy to use, does not slide on the hose. This breakaway clips are designed for emergency use in the event of an ‘out of air’ scenario. As such they are not designed to hold up to repeated attaching and detaching from the hose. Additionally, the single breakaway clip is designed to fit most single-ended bolt snap ring with a max diameter of 4.5mil.
Trying to attach the clip to a ring with a diameter of more than 4.5mm is not advisable, and will likely cause the clip to break. And finally, repeated attaching and detaching of the single clips when used for something other than a secondary regulator hose runs the risk of reducing the clip’s lifespan.
SKU: n/a -
Components and Parts, Sidemount BCD
MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring
The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring was designed for backmount and sidemount divers. The 45º Fixed angle enable divers to easily clip off their single or doubled ended bolt snaps to it. Made from 2mm titanium so ultra-light and tough. The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring has a custom Split D-Ring titanium fitting for chest or waist. Simplifies the placement and separation of bolt snaps holding other equipment.
Item weight is only 15 grams, compared to stainless steel ones which are weighing 28 grams to 37 grams (Tri-glide with Angle D-Rings).
The price listed is per piece.
SKU: n/a -
Components and Parts, Sidemount BCD
MIB Titanium Oversize Triglide
The MIB Titanium Oversize Triglide was designed for divers who need to double loop their 2 inch webbing to secure items like cave buckles and rear lower backplate for their sidemount. Traditional stainless steel triglide has 2 inch slots with only 5mm allowance, making double looping difficult. The MIB Titanium Oversize Triglide has a 2 inch slot measuring 7mm, making double looping of most webbing easier.
Made from 2mm titanium so ultra light and tough. Oversized tri-glide Can be used to make easy adjustments to the harness or keep everything in place.
The price listed is per piece.
SKU: n/a -
Gauges and Transmitter
Mini SPG Button Gauge
The Mini SPG Button Gauge is generally used on argon tanks, or for sidemount divers who are using it as a backup while using their sidemount regulators with transmitters. The Mini SPG Button Gauge can be mounted directly on first stages of your regulators or with a short HP Hose as well. The Mini SPG Button Gauge is rated up to 350 Bars, with a one inch (1″) face diameter. There are three color zones, separated into Dark green (safe zone), Yellow Zone (Time to End Dive), and red zone (Critically Low on end).
Please do not purchase the Mini SPG Button Gauge, as your primary gauge. It was NEVER INTENDED for that use. It is only used as a backup.
SKU: mini-spg -
Moving Out Sale
MOS Bubble Scuba Dome Diffuser Inon Z240 D2000
Depth:50M waterproof
Good lighting is the key for good underwater photos. Even using two strobes, the positioning can be tricky and the smallest mistake can be critical, ruining your shot with backscatter. It gets even more difficult when we get closer, specially with a wide angle lens.
The best strobe position for close focus wide angle is with the strobes at the lense level, a little bit behing the dome and pointing slightly outward. But this technique which is pretty effective to avoid backscatter has a minimum distance limit, and if you try to get closer the light won’t reach your subject. To solve this problem we need a wider light beam and a softer edge, and this is provided by the Light Dome diffusers.
We have tested multiple material options until we found the optimum balance between light loss and beam softness.
The Diffusers take out about 1/2 or 2/3 light stops compared with the original diffuser at the center of the beam, but this light is gained at the edge, where you most need it. The result when you work up close is you will be using a smaller aperture for greater depth of field, or a lower strobe power setting for faster reciclying and longer battery life.
Shadows become much softer with the diffuser, so it is also de ideal accessory for single strobe shootters who want to avoid the complexity of dual strobe systems.
Color temperature is slightly warmer that the originial diffusers. Most people won’t notice this under normal shooting circumstances, but the important point here is that the light doesn’t become any cooler, and the warm colors remail unaltered.
These examples show the typical lack of light at the center of the photo using the standard difussers and how the Light Dome diffusers correct this problem with a nice even light across the frame, even at closer distances:
SKU: MOS-BB-DD-G-IN










