Shop
Showing 1–15 of 36 results
-
Components and Parts
45-degree Oral Power Inflator – Mouthpiece only
A replacement rubber mouthpiece for the standard K-style 45-degree Oral and Power Inflator.
- A replacement mouthpiece for K-style 45-degree Power Inflator
- Soft rubber material designed for comfort
- Curved design allows for easier seal during use
- Keep a spare in your Save-A-Dive kit
SKU: n/a -
Hoses Adapters
90 Degree LP 2nd Stage
The 90 degree swivel attaches between the regulator second stage and its low-pressure hose, routing the hose down the diver’s chest and/or under the arm, which increases comfort and streamlining.
- Attaches between the regulator second stage and its low-pressure hose
- Increases comfort and hose streamlining
- Helps reduce jaw fatigue
- Fits standard LP Regulator hoses
- 9/16-Inch M x 9/16-Inch F
- Recommended for all sidemount divers
SKU: n/a -
Backplate Systems
BC Aluminium Backplate – Small size
Introducing our backplate systems, typically accompanied by a standard aluminum backplate that weighs 2.22kg and measures 26cm X 39cm. For more petite divers under 1.65m, we offer the OEM Small backplate, weighing 1.83kg and measuring 23cm X 36cm. Please be aware that the smaller aluminum backplate necessitates a Single Tank Adapter (STA). Experience enhanced comfort and tailored options with our versatile backplate selections.
The OEM Small backplate Black does not required a STA, measuring 26cm x 35cm can be another option for divers with a short torso and wider.
SKU: n/a -
Components and Parts
BC Overpressure Relief and Dump Valve OPV
A replacement BC Overpressure Relief and Dump Valve w/o flanges.
- Replacement BC Overpressure Relief and Dump Valve
- Includes spring, cage, rubber stop and pull string as shown
- Use with Dive Rite, XDEEP, DSS, DGX, Halcyon, Oxycheq and other technical brands
A generic BC Overpressure Relief and Dump Valve w/o flanges that is compatible with Dive Rite, DGX, HOG (pre-2015), XDEEP, Deep Sea Supply, Oxycheq, Halcyon and a variety of other technical diving brand BCDs.
It is NOT compatible with Aqualung, ScubaPro, Seaquest, Mares, Mares, Hollis, OMS, Poseidon, Zeagle or other major brand products.
SKU: n/a -
Components and Parts
BCD Corrugated Hoses
- Traditional “oval” shape preferred by experienced and technical divers
- Use with both the “Elbow” and the “RE- Rapid Exhaust” assembly systems
- Compatible with most 1-inch diameter power inflators and BC Integrated second stages
- We suggest using the corrugated hose clamp kits to complete your assembly
SKU: n/a -
Hoses Adapters
BCD Quick Disconnect Adapter – Standard
This adapter allows a standard LP regulator hose to be converted into a BC inflator hose. It also may serve as a lift bag quick inflator that screws directly into your first stage LP port.
- Provides 2 unique functions
- Turns LP hose into a BC inflator hose
- Use as a lift bag quick inflation adapter
SKU: n/a -
Components and Parts
BCD Shoulder Elbow
The plain BC elbow, preferred by experienced divers, can be used to replace a pull-to-dump elbow. The OEM (Non-Exhaust) Elbow w/Nut
This assembly is compatible with Wing Systems from Dive Rite, DGX, Oxycheq, Light Monkey, HOG, and some other technical wings with an opening of {1.75 in | 4.4 cm}. Not compatible with SeaQuest, Scubapro, Oceanic, Aqualung, Mares, Hollis, Zeagle, OMS and other major brands.
SKU: n/a -
Components and Parts
Bladder Flange Gasket
This generic Flange Gasket is a Female (outside/thicker/smaller) fitting that is positioned between the elbow and the flange. This is the gasket that creates the watertight seal between the corrugated hose assembly and the bladder for the aircell (wing).
SKU: n/a -
Components and Parts, Cylinder Accessories, Sidemount BCD
EPDM Hose Retainer
The EPDM Hose Retainer will withstand the test of time and diving environments with their resistance to temperature, salt, chlorine, and anything else your diving environment has to offer.
- Keep stage and deco hoses under control
- 1.5-inch wide EPDM material maintains elasticity thru extreme heat and cold
- Resistance to temperature, salt, sun and chlorine
- Fits cylinders 6.9-inch thru 8-inch diameter (11L)
SKU: n/a -
Components and Parts, Sidemount BCD
MIB Hose Breakaway Connector
The MIB break away connector allows the ease of mounting a single ended bolt snap to your long hose configuration. Traditionally, divers have relied on using cave lines for this but with this, each time you practise your break away, you no longer have to retie your single bolt snap.
The MIB break away connector is easy to use, does not slide on the hose. This breakaway clips are designed for emergency use in the event of an ‘out of air’ scenario. As such they are not designed to hold up to repeated attaching and detaching from the hose. Additionally, the single breakaway clip is designed to fit most single-ended bolt snap ring with a max diameter of 4.5mil.
Trying to attach the clip to a ring with a diameter of more than 4.5mm is not advisable, and will likely cause the clip to break. And finally, repeated attaching and detaching of the single clips when used for something other than a secondary regulator hose runs the risk of reducing the clip’s lifespan.
SKU: n/a -
Components and Parts, Sidemount BCD
MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring
The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring was designed for backmount and sidemount divers. The 45º Fixed angle enable divers to easily clip off their single or doubled ended bolt snaps to it. Made from 2mm titanium so ultra-light and tough. The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring has a custom Split D-Ring titanium fitting for chest or waist. Simplifies the placement and separation of bolt snaps holding other equipment.
Item weight is only 15 grams, compared to stainless steel ones which are weighing 28 grams to 37 grams (Tri-glide with Angle D-Rings).
The price listed is per piece.
SKU: n/a -
Gauges and Transmitter
Mini SPG Button Gauge
The Mini SPG Button Gauge is generally used on argon tanks, or for sidemount divers who are using it as a backup while using their sidemount regulators with transmitters. The Mini SPG Button Gauge can be mounted directly on first stages of your regulators or with a short HP Hose as well. The Mini SPG Button Gauge is rated up to 350 Bars, with a one inch (1″) face diameter. There are three color zones, separated into Dark green (safe zone), Yellow Zone (Time to End Dive), and red zone (Critically Low on end).
Please do not purchase the Mini SPG Button Gauge, as your primary gauge. It was NEVER INTENDED for that use. It is only used as a backup.
SKU: mini-spg -
Moving Out Sale
MOS Palm Energy Ladies Neoprene Trousers
When Thermal insulation and freedom of movement are key, these feature loaded, thermo-fibre lined neoprene trousers offer comfort and warmth like no other. Great item for your local diving in Pulau Hantu.
- Paddling specific high cut at back
- Flatlocked seams for comfort
- PU printed knee protection
- Mesh Skin side panels
- Powertex neoprene seat reinforcement
- Glide Skin ankles
- Waist loops for hangers
SKU: NA419EGY -
Moving Out Sale
MOS SMART PHONE LOCKER 2
The Trident Smart Phone Locker 2 offers solid security and protection for Cell Phones, Droid, Blackberry, HTC, and other small items while traveling or just on the go. The Smart Phone Locker 2 is padded on the top and bottom and felt lined (except for Clear) to protect from dings and scratches. Made of crush-resistant ABS plastic. The case is waterproof and comes with a Carabiner. Available in Blue only.
Dimensions: 0.787″ X 3.149″ X 5.708″
SKU: tdspl2-bl -
Dry Bags
Ocean Pack Dry Bags
Lightweight and Durable: Offer proven protection for everything from river running to motorcycle touring; Suitable for quick submersion, protects valuables from dirt, dust, sand and water
Waterproof : Provides waterproof protection for your phones, camera, clothes, and documents from Water, Sand, Dust and Dirt
SKU: n/a
