Deals of The Day
GUE Camo Sport Recycled Ballcap
This hat is designed for the athlete in us all. Made with recycled Repreve fabric, a mid-profile structured crown, soft sweat-wicking sweatband, a Velcro closure, and sporty rear laser cut ventilation, this hat is sure to become a favorite in your collection. The hat comes with an embroidered GUE arrow line marker.
GUE Grey and Black Hemp Recycled Trucker Hat
This grey/black trucker cap with a genuine leather GUE patch is made of 55% hemp/45% cotton, and the mesh is 100% recycled polyester.
It’s 6-panel, unstructured with curved bill, and has a plastic snap closure.
GUE T-Shirt – Oxblood
100% airlume combed and ring-spun cotton t-shirt, oxblood black with a light grey GUE block letter logo on the back, and a round GUE logo on front left chest.
Available in XS-XXXL
GUE Hexagonal Wood Sticker
Get your hands on our vintage-inspired, wooden GUE logo sticker! This new hexagonal design is a full color printed sticker with a 3M adhesive backing.
Measures approximately 3″(w) x 2.75″(h) with a thickness of 0.03″. Recommended for indoor use only.
GUE Mask Strap Cover
Dive in style with our new GUE mask strap cover! Wide cushioned neoprene strap offers comfort and slides over mask strap for easy installation. High-quality molded, die-cut logo will not crack or fade; resistant to most solvents. Heat sealed, RF welding ensures long life and high quality appearance.
GUE Tee Shirt – Ocean Blue
100% airlume combed and ring-spun cotton t-shirt, ocean blue with a black GUE block letter logo on the back, and a round GUE logo on front left chest.
Available in XS-XXXL
GUE Tee Shirt – Community
Feel your impact in this crazy-soft sustainable tee that uses an equivalent of up to 6 recycled plastic water bottles! Charcoal grey shirt features a GUE global community graphic on the back with smaller graphic on the front left chest.
Halcyon Carbon Fiber Pro Backplate
The ultimate lightweight travel backplate to pair with your STA of choice.
30.48 CM (width at bottom) X 39.3 CM or 12 IN (width at bottom) X 15.5 IN (standard dimensions)
26.67 CM (width at bottom) X 36.2 CM or 10.5 IN (width at bottom) X 14.25 IN (small dimensions)
Utility holes allow mating with MC Storage Pak to stow a variety of lift devices as well as the small Halcyon drysuit inflation kit
Carefully milled surfaces eliminate sharp edges
Halcyon Aluminium Backplate
As with most Halcyon products, an immense amount of behind-the-scenes work is required to create a plate that we are proud to sell.
Halcyon Infinity (30lbs) BC System Complete
The Halcyon Infinity™ system is not your typical buoyancy compensator. In fact, it establishes a new standard for single cylinder, recreational diving.
Inflator with 52 CM / 22 IN LP hose comes standard on Halcyon wings
Halcyon Eclipse BC 30lbs System Complete
The Halcyon Eclipse™ buoyancy compensator system comes standard with a wing, backplate, harness and crotch strap, harness hardware, and a single tank adapter with cylinder straps. Assembly is required by the user. Additional items such as ACB weight pockets, EVA plush back pad, etc. are not included in the base price of the unit.
Halcyon BC Secure Harness Webbing Replacement
The Halcyon Secure Harness provides an infinitely adjustable fit, eliminating the uncomfortable movement found in conventional jacket buoyancy compensators. This is a standard 12′ standard length webbing replacement. All 12ft webbing comes with a stainless steel grommet hole in the centre of the webbing.
Halcyon Single Tank Adapter STA
HALCYON SINGLE-TANK ADAPTER (STA) WITH WEIGHT (3.42 KG / 7.55 LB)
Divers who are able to remove unnecessary weight from their waist enjoy greater comfort and better in-water position.
Popular Categories this Week
-
GUE Merchandise
GUE Camo Sport Recycled Ballcap
This hat is designed for the athlete in us all. Made with recycled Repreve fabric, a mid-profile structured crown, soft sweat-wicking sweatband, a Velcro closure, and sporty rear laser cut ventilation, this hat is sure to become a favorite in your collection. The hat comes with an embroidered GUE arrow line marker.
SKU: gue-mask-strap-1-1-1-1-1-1 -
GUE Merchandise
GUE Grey and Black Hemp Recycled Trucker Hat
This grey/black trucker cap with a genuine leather GUE patch is made of 55% hemp/45% cotton, and the mesh is 100% recycled polyester.
It’s 6-panel, unstructured with curved bill, and has a plastic snap closure.SKU: gue-mask-strap-1-1-1-1-1 -
GUE Merchandise
GUE T-Shirt – Oxblood
100% airlume combed and ring-spun cotton t-shirt, oxblood black with a light grey GUE block letter logo on the back, and a round GUE logo on front left chest.
Available in XS-XXXL- 4.2 oz. 100% Airlume combed and ring-spun cotton, 32 singles
- Pre-shrunk
- Retail fit
- Unisex sizing
- Cover stitched collar and sleeves
- Shoulder-to-shoulder taping
- Side seams
- Tear away label
SKU: n/a -
GUE Merchandise
GUE Hexagonal Wood Sticker
Get your hands on our vintage-inspired, wooden GUE logo sticker! This new hexagonal design is a full color printed sticker with a 3M adhesive backing.
Measures approximately 3″(w) x 2.75″(h) with a thickness of 0.03″. Recommended for indoor use only.
SKU: gue-mask-strap-1-1
Headphones
-
Tools, Knifes & Gadgets
EEZYCUT Trilobite
The forefront of Emergency Cutting Tool (E.C.T.) dynamics and design, the EEZYCUT TRILOBITE was developed for divers, mariners, mountaineers, extreme sports adventurers and rescue service providers who demand a tool that delivers a swift, safe, efficient cut. The published item comes only with the standard harness pouch.
SKU: 5487FB8/27
Smartphones & Tablets
Recommendation For You
View All Recommendations-
Tools, Knifes & Gadgets
EEZYCUT Trilobite
The forefront of Emergency Cutting Tool (E.C.T.) dynamics and design, the EEZYCUT TRILOBITE was developed for divers, mariners, mountaineers, extreme sports adventurers and rescue service providers who demand a tool that delivers a swift, safe, efficient cut. The published item comes only with the standard harness pouch.
SKU: 5487FB8/27 -
Landyards, Clips, Buckles and Boltsnap
Stainless Steel Double-Eye Boltsnap
- Premium bolt snaps are heavy-duty (316-series) stainless steel alloy suitable for marine applications. For long life and ease-of-use, the interior spring is also made of (316-series) stainless steel alloy.
- Premium quality stainless steel snaps
- Passivated and polished for marine applications
- Heavy-duty (316-series) stainless steel alloy body
- Interior spring is (316-series) stainless steel alloy
- Smooth gate action – No sharp edges
SKU: n/a - Premium bolt snaps are heavy-duty (316-series) stainless steel alloy suitable for marine applications. For long life and ease-of-use, the interior spring is also made of (316-series) stainless steel alloy.
-
-
First Stage
Scubapro Mk 25 EVO
- Air balanced flow-through piston in a chrome-plated brass body provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
- Patented XTIS (Extended Thermal Insulating System) fully isolates the mechanical elements from the cold, increasing freezing resistance 30 percent over the previous MK25 without compromising breathing performance. Key insulation system components are visible in blue.
- New spring insulating coating, body insulating bushing, anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance.
- Anti-freeze protection radically increases breathing reliability when diving in the most extreme water temperatures.
- Two opposing high pressure ports allow the first stage to be positioned either up or down.
- Five high-flow low pressure ports on a swivel turret maximize hose routing options.
- External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
- Available in either 3364psi/232bar INT or 4350psi/300bar DIN configurations.
- Weight: INT 232 (oz/g): 27.9/790; DIN 300 (oz/g): 20.1/570.
- Airflow at 2900psi/200bar: (l/min/SCFM): >8500/301.
- Intermediate pressure (psi/bar): 133-142/9.2-9.8.
SKU: 5487FB8/36 -
Components and Parts
45-Degree K Oral Power Inflator
A replacement K-style 45-Degree Oral and Power Inflator incorporating the common Schrader valve BC quick disconnect post.
- A replacement K-style 45-degree Power Inflator
- Fits 1-inch inside diameter corrugated rubber hose
- Includes mouth guard and pin for pull-to-dump cable
- Compatible with many/most Scuba brands
- The attaching hardware (clamps or zip ties) is not included
SKU: 5487FB8/41
