Components and Parts Archives - Singapore Scuba Diving Shop Online https://store.orpheusdive.com/department/bcd/components-and-parts/ Orpheus Dive Sat, 17 Jan 2026 08:55:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://store.orpheusdive.com/wp-content/uploads/2021/03/cropped-store-orpheus-ico-32x32.png Components and Parts Archives - Singapore Scuba Diving Shop Online https://store.orpheusdive.com/department/bcd/components-and-parts/ 32 32 MIB Titanium Oversize Triglide https://store.orpheusdive.com/shop/bcd/components-and-parts/mib-titanium-oversize-triglide/ Thu, 25 Nov 2021 07:50:23 +0000 https://store.orpheusdive.com/?post_type=product&p=7151 The MIB Titanium Oversize Triglide was designed for divers who need to double loop their 2 inch webbing to secure items like cave buckles and rear lower backplate for their sidemount. Traditional stainless steel triglide has 2 inch slots with only 5mm allowance, making double looping difficult. The MIB Titanium Oversize Triglide has a 2 inch slot measuring 7mm, making double looping of most webbing easier.

Made from 2mm titanium so ultra light and tough. Oversized tri-glide Can be used to make easy adjustments to the harness or keep everything in place.

The price listed is per piece.

The post MIB Titanium Oversize Triglide appeared first on Singapore Scuba Diving Shop Online.

]]> The post MIB Titanium Oversize Triglide appeared first on Singapore Scuba Diving Shop Online.

]]> OEM Hose Breakaway Connector https://store.orpheusdive.com/shop/bcd/components-and-parts/hose-breakaway-connector/ Thu, 25 Nov 2021 07:01:13 +0000 https://store.orpheusdive.com/?post_type=product&p=7141 The MIB break away connector allows the ease of mounting a single ended bolt snap to your long hose configuration. Traditionally, divers have relied on using cave lines for this but with this, each time you practise your break away, you no longer have to retie your single bolt snap.

The MIB break away connector is easy to use, does not slide on the hose. This breakaway clips are designed for emergency use in the event of an ‘out of air’ scenario. As such they are not designed to hold up to repeated attaching and detaching from the hose. Additionally, the single breakaway clip is designed to fit most single-ended bolt snap ring with a max diameter of 4.5mil.

Trying to attach the clip to a ring with a diameter of more than 4.5mm is not advisable, and will likely cause the clip to break. And finally, repeated attaching and detaching of the single clips when used for something other than a secondary regulator hose runs the risk of reducing the clip’s lifespan.

The post OEM Hose Breakaway Connector appeared first on Singapore Scuba Diving Shop Online.

]]> The post OEM Hose Breakaway Connector appeared first on Singapore Scuba Diving Shop Online.

]]> MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring https://store.orpheusdive.com/shop/bcd/components-and-parts/mib-titanium-chest-dual-slot-chest-45o-fixed-d-ring/ Thu, 25 Nov 2021 06:31:57 +0000 https://store.orpheusdive.com/?post_type=product&p=7136 The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring was designed for backmount and sidemount divers. The 45º Fixed angle enable divers to easily clip off their single or doubled ended bolt snaps to it. Made from 2mm titanium so ultra-light and tough. The MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring has a custom Split D-Ring titanium fitting for chest or waist. Simplifies the placement and separation of bolt snaps holding other equipment.

Item weight is only 15 grams, compared to stainless steel ones which are weighing 28 grams to 37 grams (Tri-glide with Angle D-Rings).

The price listed is per piece.

The post MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring appeared first on Singapore Scuba Diving Shop Online.

]]> The post MIB Titanium Chest Dual Slot Chest 45º Fixed D-Ring appeared first on Singapore Scuba Diving Shop Online.

]]> Sidemount Cylinder Tank Rigging https://store.orpheusdive.com/shop/bcd/components-and-parts/sidemount-cylinder-tank-rigging/ Sun, 07 Mar 2021 04:46:31 +0000 https://store.orpheusdive.com/?post_type=product&p=6698
  • Can be changed from cylinder to cylinder quickly
  • Perfect system for travel or rental tanks
  • Includes bolt snaps and nylon cord

    • The post Sidemount Cylinder Tank Rigging appeared first on Singapore Scuba Diving Shop Online.

    ]]>     The post Sidemount Cylinder Tank Rigging appeared first on Singapore Scuba Diving Shop Online.

    ]]>         Stainless Steel Triglide https://store.orpheusdive.com/shop/bcd/components-and-parts/stainless-steel-triglide/ Sat, 06 Mar 2021 08:37:11 +0000 https://store.orpheusdive.com/?post_type=product&p=6662 For use with harnesses and weightbelts. 2" x 1.5"

    The post Stainless Steel Triglide appeared first on Singapore Scuba Diving Shop Online.

    ]]>     The post Stainless Steel Triglide appeared first on Singapore Scuba Diving Shop Online.

    ]]>         Sidemount Sliding D-Ring https://store.orpheusdive.com/shop/bcd/components-and-parts/sidemount-sliding-d-ring/ Sat, 06 Mar 2021 08:25:04 +0000 https://store.orpheusdive.com/?post_type=product&p=6659 Sliding D-ring's are installed on the harness in addition to primary d-rings. Sliding D-ring can be pushed up and down the waist strap to desired by diver location and allows to adjust on-the-fly sidemount cylinder clip off point to compensate the change in tank buoyancy. Its a simple yet durable part that will let sidemount diver keep the cylinders in perfect position throughout entire dive ensuring most streamline and comfort trim profile. The stainless steel sliding d-rings will work with any 2" wide nylon harness webbing.

    SOLD AS PAIR / 2 pcs set

    The post Sidemount Sliding D-Ring appeared first on Singapore Scuba Diving Shop Online.

    ]]>     The post Sidemount Sliding D-Ring appeared first on Singapore Scuba Diving Shop Online.

    ]]>         Diverite Deluxe Hose Retainers https://store.orpheusdive.com/shop/bcd/components-and-parts/diverite-deluxe-hose-retainers/ Fri, 05 Mar 2021 09:50:45 +0000 https://store.orpheusdive.com/?post_type=product&p=6504 Keep regulator hoses lying flat and avoid kinking with our Deluxe Hose Retainers. Our wide, 4-inch (10 cm) retainer band is made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly. Silicone strips on the inside of the band grip the tank and keep the Deluxe Hose Retainer from rolling. A 1" x 2" (2.5cm x 5cm) nylon pull tab makes accessing the hose retainer easy, even when using gloves.

    Size large (GM2050-7) fits 7.25-inch (184 mm) and 8-inch (203 mm) diameter tanks. Size small (GM2050-5) fits 5.5-inch (127 mm) diameter tanks. Both size retainers come in black only. Made in the U.S.A.

    The post Diverite Deluxe Hose Retainers appeared first on Singapore Scuba Diving Shop Online.

    ]]>     The post Diverite Deluxe Hose Retainers appeared first on Singapore Scuba Diving Shop Online.

    ]]>         EPDM Hose Retainer https://store.orpheusdive.com/shop/bcd/components-and-parts/epdm-hose-retainer/ Fri, 05 Mar 2021 08:57:38 +0000 https://store.orpheusdive.com/?post_type=product&p=6499 The EPDM Hose Retainer will withstand the test of time and diving environments with their resistance to temperature, salt, chlorine, and anything else your diving environment has to offer.

    • Keep stage and deco hoses under control
    • 1.5-inch wide EPDM material maintains elasticity thru extreme heat and cold
    • Resistance to temperature, salt, sun and chlorine
    • Fits cylinders 6.9-inch thru 8-inch diameter (11L)

    The post EPDM Hose Retainer appeared first on Singapore Scuba Diving Shop Online.

    ]]>     The post EPDM Hose Retainer appeared first on Singapore Scuba Diving Shop Online.

    ]]>         Cressi Commando Complete Inflator https://store.orpheusdive.com/shop/bcd/components-and-parts/cressi-commando-complete-inflator/ Wed, 07 Oct 2020 05:49:05 +0000 https://www.orpheusdive.com/onlinestore/?post_type=product&p=5268

    The Cressi Low Pressure By-Pass BCD Power Inflator Assembly is a compact, ergonomic, and reliable inflator which makes an ideal replacement BCD Inflator to fit your Cressi BCD. Power inflation, gradual deflation and quick air dump, oral inflation, power inflator hose coupling, and corrugated hose attachment are all incorporated into a single unit.

    The post Cressi Commando Complete Inflator appeared first on Singapore Scuba Diving Shop Online.

    ]]>     The post Cressi Commando Complete Inflator appeared first on Singapore Scuba Diving Shop Online.

    ]]>         Oxycheq Shoulder Harness Pads https://store.orpheusdive.com/shop/bcd/components-and-parts/oxycheq-shoulder-harness-pads/ Wed, 07 Oct 2020 05:44:47 +0000 https://www.orpheusdive.com/onlinestore/?post_type=product&p=5248 Removable Shoulder Harness Pads go on the shoulder straps of a Hogarthian or Speed Harness Rig. Helps to keep the straps from digging into the shoulders when you are out of the water and the weight of your gear is on your shoulders. The pads are easily installed or removed without having to disassemble the Hogarthian or Speed Harness harness. The pads have a left and right side configuration.

    The post Oxycheq Shoulder Harness Pads appeared first on Singapore Scuba Diving Shop Online.

    ]]>     The post Oxycheq Shoulder Harness Pads appeared first on Singapore Scuba Diving Shop Online.

    ]]>